Basic Info.
Mathematical Model
Linear
Function
Automatic Control, Protection, Monitoring, Measurement
Certification
RoHS, CCC, ISO: 9001, CE
Product Description
Technical Parameters |
Item | AF-10MR-A2 | AF-10MR-D2 | AF-10MR-E2 | AF-10MT-D2 | AF-10MT-GD2 | AF-10MT-E2 | AF-20MR-A2 | AF-20MR-D2 | AF-20MR-E2 | AF-20MT-D2 | AF-20MT-GD2 | AF-20MT-E2 | Surge Immunity | 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) | Electrostatic Discharge (outer casing) | ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) | Ambient Temperature | -10ºC~+55ºC | Storage Temperature | -40ºC~+70ºC | Ambient Humidity | 5%~95%RH | Degree of Protection | IP20(Non-waterproof) | Installation | Fixing with M3 screws or Standard DIN rail mounting | Dimensions (mm) | 71.6*90.4*51.3(10 points);126.4*90.4*51.3(20 points) | Programming Language | FBD | Points | 10 points/20 points | Memory Capacity | 127 FBDs | Real-time Clock | 160h | Password Protection | yes | Analog Operation | At most 12 channels with DC 0-10V voltage | Simulate Monitoring | Yes | Communication Interface | support 2 channel with RS485 and 1 channel with program interfaces | Baud Rate | 9600bps/19200bps | Communication Protocol | Self-defined protocol/MODBUS RTU protocol (only read) | Power Supply | Rated Voltage | AC100-240V | DC12-24V | AC/DC12-24V | DC12-24V | DC12-24V | DC12-24V | Permissible Range | DC85-260V | DC10-28V | AC/DC10-28V | DC10-28V | DC10-28V | DC10-28V | Power Consumption | <10w | <7w | <7w | <2w | <2w | <2w | Digital Input | Input Type | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | Input Signal 0 | AC0-40V | DC0-5V | AC/DC0-5V | DC0-5V | DC0-5V | DC0-5V | Input Signal 1 | AC80-240V | DC10-24V | AC/DC10-24V | DC10-24V | DC10-24V | DC10-24V | Isolation | Photoelectric isolation | -- | -- | -- | -- | -- | Isolated Group | 6/12 groups | Isolated Voltage | 2500/5000Vr.m.s | Digital Output | Output Type | Relay | Relay | Relay | Transistor(NPN) | Transistor(PNP) | Transistor(NPN) | Isolation Method | Relay isolation | Relay isolation | Relay isolation | - | - | - | Analog Input | Input Type | -- | (DC0-10V)/6 inputs | -- | (DC0-10V)/6 inputs | (4-20mA)/2 inputs | -- | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | | | | | | | | | | | |
|
Type |
AF-10MR-A2 | AC100V-240V | 6 points digital input | 4 points relay output | AF-10MR-D2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points relay output | AF-10MR-E2 | AC/DC12V-24V | 6 points digital input | 4 points relay output | AF-10MT-D2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points NPN transistor output | AF-10MT-GD2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points PNP transistor output | AF-10MT-E2 | DC12V-24V | 6 points digital input | 4 points NPN transistor output | AF-20MR-A2 | AC100V-240V | 12 points digital input | 8 points relay output | AF-20MR-D2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points relay output | AF-20MR-E2 | AC/DC12V-24V | 12 points digital input | 8 points relay output | AF-20MT-D2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points NPN transistor output | AF-20MT-GD2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points PNP transistor output | AF-20MT-E2 | DC12V-24V | 12 points digital input | 8 points NPN transistor output |
|
| Auxiliary Module |
AF-2322 | the cable is used to read/write the program by PC 232 port | AF-DUSB2 | the cable is used to read/write the program by PC USB port | AF-HMI | The removable LCD panel |
|
| |
| Dimensions |
Take the 10 points module as an example. The 20 points modules share the same width and height, the only one difference exists in the length. |
| Type | Dimensions(mm) | 10 points main module | 71.6*90.4*51.3 | 20 points main module | 126.4*90.4*51.3 |
|
Introducing the FAB Intelligent Controller Series, an innovative programmable controller unveiled by ARRAY. Designed with user-friendly FBD (Function Block Diagram) programming, this series is remarkably easier to grasp than traditional PLCs that rely on ladder diagrams and complex instructions. The ARRAY FAB Series ingeniously merges the traditional standalone PLC controller with an integrated writer, enabling users to effortlessly program using function keys directly on the intuitive LCD front panel. This thoughtful design not only slashes costs but also enhances user convenience. With its compact and lightweight build, the ARRAY FAB is perfectly suited for internal installation applications, bringing efficiency and ease to your operations.
Moreover, the FAB Intelligent Controller Series excels in both local and remote Internet communication and monitoring capabilities, adding a layer of versatility to its impressive feature set. It seamlessly integrates with a voice module, empowering users with functionalities such as telephone remote control, voice prompting, and auto-dialing. Currently, the ARRAY FAB is making a significant impact across diverse sectors, including industry, agriculture, and automated home control. Its applicability is virtually limitless, proving indispensable wherever advanced control solutions are required.
27e9bc15
Main Product
- Industrial Radio remote control F21 series,including F21-E1B, F21-E1, F21-E2,F21-4S, and F24-4D and o on.
- F21 series is the most popular one, and find its way on the international market because of highest cost efficient, and it is greatly popular.
F24 is designed to use in construction cranes, bridge cranes and also in special applications with durability and low cost.
Programmable function setting via Windows software !
Ultra-low battery power consumption (Eco-Friendly)
Pre-wiring receiver made the installation easy and fast ever!
Durable nylon-fiber housing for extra shock resistance
Low power consumption with 2 AA batteries (last up to 2 months in normal operation)
Operating range up to 100 meters
Programmable function setting through Windows-based software
Economic efficiency, ease of operation Microsoft Windows based software for easy customize configuration
Pre-wiring standard cable making wiring procedures easier.
100% compatible components reducing stock of spare part.
Safety features:
4.3 billions unique ID code / Hamming code > 4 / enhanced watch-dog circuit
Operating temperature range -35°C to +80°C
SAGA Series
*Rugged, durable, IP65 industrial specification housing
*Security provided by more than 4 billion sets of never repeating lD codes
*Ultra low power consumption - about 3 months with two No. 5 alkaline batteries
*DebugTechnique with Hamming Code
*Normaloperation in the environment with -45 to+80c
*The operating distance can reach 100 meters
*The specially designed relay module is suitable for installation on highly vibrating engineering vehicles and automatic machines and tools
*The receiver,provides an output cable, allowing you to easily and quickly complete the installation equipment
*Design of safety circuit to prevent sudden power failure
APB Series PLC
Features:
Main module: 12\22\24 points; Extension module: 22 points;
It is flexible for extending, and the optimal max. configuration: 7 I/O extension modules, 1 voice module, and 1 SMS module;
Program memory capacity: 320 FBDs, EEPROM; It is allowed to place a Li-ion battery to power the clock;
Under the circumstance of DC12-24V, the main machine at most has 12 voltage analog inputs 0-10V, 2 current analog inputs 4-20mA and 2 analog outputs 4-20mA;
High-speed operation: at most 4 high-speed inputs 10KHZ and 2 high-speed outputs 10KHZ;
MODBUS protocol, and can be connected to SH-300 (Text Panel); New function blocks: pulse width modulation (PWM), pulse output (PTO), ACC, SMS and analog calculation etc.;
SR series PLC
This intelligent controller, adopting function block programming, having large programming capacity, being freely programmed according to different users and different fields, can run at your desired time table and the RTC accuracy can reach second and makes your time control more accurate.
And up to 128 time sessions can be set , especially suitable for time-control system. Safety password function makes your program absolutely safe. Before writing program, password can be set. And only after entering the correct password, can the program be modified.
It is equipped with a removable, convenient and programmable LCD, providing 64 friendly human-machine interfaces, 32 virtual keys, having the function to display the alarming message and parameter and to modify the parameter. When needed, it can be installed. And when not needed, it can be removed and replaced with an ordinary front panel.
Thus the cost will be greatly reduced. The input can receive not only the digital input but also the analogue input to perform the control and . transmission of fthe temperature, moisture, pressure, flow level unit and so on.
It has well-featured and compact design with 8 point input and 4 point output. Equipped with expansion module, it can be expanded into 82 I/O better ,and to MAX 122I/O.It can be connected with telephone voice module and remote control module to perform the notification and alarming function.
Company Profile
Nanjing New-Canyon Electronics Technology Co., Ltd. is a distributor of Telecrane wireless remote control and also sells product from ARRAY Electronics Co., Ltd.
TELECRANE was founded in 1985 and is one of the leading company in the development and manufacture of industrial radio remote controls.
With more than 35 years in the industry, we have very strong experience of radio control systems and TELECRANE is a symbol of durable, high value industrial radio remote control systems available in either a standard or custom configuration.
TELECRANE has various safety features such as applying sophisticated Surface Acoustic Wave (SAW) filter which blocks unwated radio signal to ensure a smooth radio link between transmitter & receiver. In order to prevent the crane is operated by unauthorized person, the digital pin-code (password) could be set up to the system for increasing the security.
TELECRANE will continue to dedicate all its efforts toward new heights of success. Providing a high quality, reliable and safe industrial Radio Remote Controller is always our goal and the commitment to all of our customers
Certifications
After Sales Service
Our services
Professional industrial remote control
1. Any enquiries will be answered within 24 hours.
2. Professional manufacturers and strong r&d team support.
3.OEM/ODM is available, we can customize according to the requirements of customers.
4.Due to transportation restrictions, the battery is not in the package. You should buy AA battery by yourself. We are a factory from China, please don't worry about the quality of our products and services.
5. If you have any questions about the product and logistics, please email us and we will reply as soon as possible.
6. After-sales service:
1) AII products are subject to strict factory quality inspection before packaging.
2) All products have been packaged in our factory, and the second package is delivered through express service before shipment.
3) If there is any problem during operation or installation, please feel free to contact us and we will solve it with professional guidance. Thank you for your trust and cooperation
FAQ
1. Q: Do you have a catalogue? Can you send me the catalogue to have a check of all your products?
A: Yes , We have product catalogue.Please contact us on line or send an Email to sending the catalogue.
2. Q: I need your price list of all your products, do you have a price list ?
A: We do not have a price list of all of our products. Because we have so many items,and it's impossible to mark all of their
price on a list.And the price are always changing because of the producing cost.If you want to check any price of our products,please feel free to contact us.We will send offer to you soon!
3. Q : Can you make customized products and customized packing?
A: Yes.We made a lot of customized products for our customer before.(mainly wire harness) And we made many moulds for our customers alread.About customized packing,we can put your Logo or other info on the packing.There is no problem.Just have to pointout that ,it will cause some additional cost.
4. Q: Can you provide samples ? Are the samples free ?
A: Yes,we can provide samples.Normally,we provide 1-3pcs samples for test or quality checking. If you need many items, or need more qty for each item,we will charge for the samples."
5. Q: What kind of payment do you accept ? Can I pay RMB ?
A: We accept T/T(Wire transfer),Western Union and Paypal,credit card. Please be sure that we can receive the same amount of the Invoice. And you can pay money In RMB. No problem."
6. Q : What about your delivery time?
A: We have a lot of products in stock.We can send the stock products in 3 work days.If without stock,or stock is not enough, we will check the delivery time with you."
7. Q : How to ship my order ? Is it safe?
A: For small package, we will send it by Express, tsuch as DHL,FedEx,,UPS,TNT,EMS.That's a
Door to Door service.For big packages, we will send them by Air or By sea.We will use good packing and ensure
the safety.We will be responsible to any product damage caused on delivery."
Address:
Haifushangcheng 4-711, Yanziji district
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001, QC 080000
Company Introduction:
Nanjing New Canyon Electronics Technology Co., Ltd was founded in 2009 and is one of high technology electronics conpanies.
Nanjing New Canyon Electronics Technology Co., Ltd. is a distributor of Telecrane wireless remote control and also sells product from ARRAY Electronics Co., Ltd.
TELECRANE was founded in 1985 and is one of the leading company in the development and manufacture of industrial radio remote controls.
With more than 35 years in the industry, we have very strong experience of radio control systems and TELECRANE is a symbol of durable, high value industrial radio remote control systems available in either a standard or custom configuration.
TELECRANE has various safety features such as applying sophisticated Surface Acoustic Wave (SAW) filter which blocks unwated radio signal to ensure a smooth radio link between transmitter & receiver. In order to prevent the crane is operated by unauthorized person, the digital pin-code (password) could be set up to the system for increasing the security.
TELECRANE will continue to dedicate all its efforts toward new heights of success. Providing a high quality, reliable and safe industrial Radio Remote Controller is always our goal and the commitment to all of our customers.
